Sold Out for now, sign up for in-stock notifications!
Upscale of the popular Estes classic. 3" diameter 66" long (upscaled from current Cherokee-E) 29mm motor mount (special foil lined tube)
Flights on large F motors up to I motors. Estimated altitude on I205: 3000' CP is 145cm from the nose cone tip on the 66" long version. That should be right in front of where the forward end of the fin hits the body.
Vander-Burn model rocketry kits are made for experienced modelers who are comfortable building mid and high-powered model rockets.
Vander-Burn model rocketry kits are recommended for ages 18+.
Included Components and notes:
Laser slotted body tube (Sometimes end of laser-cut slots gets creased. This is OK and will straighten out once centering rings are installed) 29mm motor mount with Estes screw on motor retainer. High quality 1/8” Baltic birch fins and centering rings. Fully laser cut - no tabs to sand off. Stickershock23 graphics included. Old-school red color printed wraps for the body, cut vinyl swoops for the fins. Kit weight (before glue and paint): 24oz. Rocket Stand in photo not included Motor ejection baffle with eye bolt. Bulkhead plate also included if you wish to build it payload style. Rail buttons and 1/4" launch lug. Launch Lab 30" Blue Nylon parachute (Estes red chute shown in pic).
Get notified by email when this product is in stock.
Upscale of the popular Estes classic. 3" diameter 66" long (upscaled from current Cherokee-E) 29mm motor mount (special foil lined tube)
Flights on large F motors up to I motors. Estimated altitude on I205: 3000' CP is 145cm from the nose cone tip on the 66" long version. That should be right in front of where the forward end of the fin hits the body.
Vander-Burn model rocketry kits are made for experienced modelers who are comfortable building mid and high-powered model rockets.
Vander-Burn model rocketry kits are recommended for ages 18+.
Included Components and notes:
Laser slotted body tube (Sometimes end of laser-cut slots gets creased. This is OK and will straighten out once centering rings are installed) 29mm motor mount with Estes screw on motor retainer. High quality 1/8” Baltic birch fins and centering rings. Fully laser cut - no tabs to sand off. Stickershock23 graphics included. Old-school red color printed wraps for the body, cut vinyl swoops for the fins. Kit weight (before glue and paint): 24oz. Rocket Stand in photo not included Motor ejection baffle with eye bolt. Bulkhead plate also included if you wish to build it payload style. Rail buttons and 1/4" launch lug. Launch Lab 30" Blue Nylon parachute (Estes red chute shown in pic).
