** SCRATCH & DENT VERSION, MEANING THE PLYWOOD HAS SOME DAMAGE THAT WE CANNOT SELL IT AS A “GOOD CONDITION” ITEM. SOLD AT A DISCOUNT, AS IS, NO REFUNDS. PHOTO DOES NOT SHOW DAMAGE NOR IS ACCURATE. READ CONDITION BELOW BEFORE PURCHASING **
Upgrade your Estes Mega Mosquito to the max with our high quality, durable laser-cut plywood components! Let your rocket take on bigger impulse engines, as the plywood components can handle much more strenuous forces than the stock balsa and cardboard components can.
Vander-Burn model rocketry components are made for experienced modelers who are comfortable modifying their own rockets beyond supplied instructions. As with any modifications from the original manufacturers’ design, you may need to add nose weight to re-balance the rocket, and any potential modifications should be completed in a simulation software or properly tested before building and launching.
Included Components and notes:
Three (3) 1/8" thick Baltic Birch Plywood through-the-wall fin cores to fit Estes Mega Mosquito kit #1335. Use the balsa skins that came with the kit on top of our plywood cores.
Two (2) 1/8" thick Baltic Birch Plywood 24 mm to BT-80 centering rings (one ring has shock cord mounting holes)
We may have a Mega Mosquito kit available in limited quantities here.
You can order Kevlar Shock Cord for this Upgrade Kit here.
Condition: Ply fins may have knot holes, edge gaps, gouges or other imperfections. We strive to have no more than one warped fin per set, but this is not guaranteed and sometimes it’s a possibility all fins could be warped. THESE WILL REQUIRE SOME WORK to get nice for your rocket. If you don’t want to put in the work, don’t buy them. Centering rings may have some blemishes but most are taken from “good” stock.
** SCRATCH & DENT VERSION, MEANING THE PLYWOOD HAS SOME DAMAGE THAT WE CANNOT SELL IT AS A “GOOD CONDITION” ITEM. SOLD AT A DISCOUNT, AS IS, NO REFUNDS. PHOTO DOES NOT SHOW DAMAGE NOR IS ACCURATE. READ CONDITION BELOW BEFORE PURCHASING **
Upgrade your Estes Mega Mosquito to the max with our high quality, durable laser-cut plywood components! Let your rocket take on bigger impulse engines, as the plywood components can handle much more strenuous forces than the stock balsa and cardboard components can.
Vander-Burn model rocketry components are made for experienced modelers who are comfortable modifying their own rockets beyond supplied instructions. As with any modifications from the original manufacturers’ design, you may need to add nose weight to re-balance the rocket, and any potential modifications should be completed in a simulation software or properly tested before building and launching.
Included Components and notes:
Three (3) 1/8" thick Baltic Birch Plywood through-the-wall fin cores to fit Estes Mega Mosquito kit #1335. Use the balsa skins that came with the kit on top of our plywood cores.
Two (2) 1/8" thick Baltic Birch Plywood 24 mm to BT-80 centering rings (one ring has shock cord mounting holes)
We may have a Mega Mosquito kit available in limited quantities here.
You can order Kevlar Shock Cord for this Upgrade Kit here.
Condition: Ply fins may have knot holes, edge gaps, gouges or other imperfections. We strive to have no more than one warped fin per set, but this is not guaranteed and sometimes it’s a possibility all fins could be warped. THESE WILL REQUIRE SOME WORK to get nice for your rocket. If you don’t want to put in the work, don’t buy them. Centering rings may have some blemishes but most are taken from “good” stock.
Image 1 of 1
